-40%
RE55422 AC Compressor Single Groove pulley W/ Clutch Fits John Deere

RE55422 AC Compressor Single Groove pulley W/ Clutch Fits John Deere

$ 155.76

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • Model 1: 4560 s/n 003584-, 4755 s/n 010879-, 4760 s/n 003366-
  • Model 2: 4955 s/n 010371-, 4960 s/n 005730-, 655B, 670B, 672B
  • Model 3: 744H, 750B, 750C, 755B
  • Brand: Aftermarket
  • Compatible Equipment Type: Tractor
  • Refund will be given as: Money Back
  • Compatible Equipment Make: John Deere
  • Condition: New
  • Model: WN-RE55422
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Restocking Fee: No
  • MPN: RE55422

    Description

    Air Conditioner, Compressor, Single Groove Pulley w/ Clutch, fits John Deere
    Models:
    4560 s/n 003584-, 4755 s/n 010879-, 4760 s/n 003366-, 4955 s/n 010371-, 4960 s/n 005730-, 655B, 670B, 672B, 744H, 750B, 750C, 755B
    Replaces:
    RE55422, A-RE55422, TY6787, SE501468, TY6784, 447100-3838, 471-0447, RE52454
    The following steps must be performed prior to compressor installation for warranty to be considered on all A/C compressors. Failure to do so will void all warranty.
    Please read the following before installing:
    1.    Was the system (condenser, evaporator, lines, etc.) flushed with an approved liquid?
    2.    Was a new receiver-drier or accumulator put on when the compressor was replaced?
    3.    Were the expansion valves or office tubes inspected – cleaned – replaced?
    4.    Were lines inspected / replaced?
    5.    Was the condenser and evaporator checked/cleaned of debris to be sure there is a free flow of air through them?
    6.    Was the system properly vacuumed down?
    7.    Check and use the OEM recommended amounts for the type of oil needed.
    8.    After filling system with Freon, was the compressor hand turned to avoid hydro lock?
    9.    Was the voltage checked at the compressor for required the voltage to avoid clutch failure?
    10.    Was the system run and checked for leaks?
    11.    Was the Freon checked for the proper level to prevent under/ overcharging?
    12.
    For any reason a warranty claim should arise the proper documentation/shop work order of the above steps should be available and accompany the compressor for warranty.